MTL 9180 Series Redundant Fieldbus Power Supplies

Eight-segment power system for use in all fieldbus systems, including Invensys Foxboro I/A series control systems and Yokogawa CENTUM CS3000.

Starting at $3,897.00

View Company Reviews
Manufactured
Includes
Availability
  • Usually ships in 3-5 weeks
Product Manual Product Specs (3 Files)

Features

  • 19.2 to 30V input voltage (DC)
  • Output voltage (DC)
    • 28-32V for 9191-FP modules
    • 19-22V for 9192-FP modules
  • Four channels
  • 0 to 250mA design current per segment
  • >320mA current limit
  • -4 to 140°F (–20 to 60°C) operating temperature range
  • IP20 to BS EN 60529
  • Flexible N+1 redundancy
  • Fully isolated
  • Hot swappable power modules
  • Low power dissipation
  • Online diagnostics option
  • Pluggable trunk surge protection option

The MTL 9180 Series redundant Fieldbus power supplies are designed to provide redundant power for up to eight FOUNDATION fieldbus H1 segments and are suitable for use with all fieldbus systems. They are optimized for use in general purpose and hazardous area High Energy Trunk architectures which, with the appropriate FieldPlus wiring components, supports fieldbus devices using all hazardous area protection techniques. The power supplies are designed to optimize cabinet layouts, achieving the maximum number of fieldbus segments powered per cabinet while providing space for installing and maintaining cable connections and reducing the operating temperature. The F809F-Plus physical layer Fieldbus Diagnostics Module may be installed on any 9180 carrier to automatically collect and distribute additional diagnostic information for each of the eight fieldbus segments.

The 9180 series should be selected for all new applications. Its unique N+1 redundancy approach provides flexibility to the system designer meeting the initial demands of the project with two power supply modules per segment, while having the ability to add a third power supply later to meet expansion requirements. The advantage to the operator is typically a 25% savings in initial capital cost compared to a conventional, 1+1 redundant architecture. High system availability is achieved with the use of passive components for power conditioning, galvanic isolation and power regulation delivering redundant fieldbus power at up to 28V, 500mA per segment. The product range also includes power supply modules that can be used to provide power for segments with Ex ic spurs, to be used in conjunction with the MTL F300 range of Megablock device couplers and the F30 Ex ic adaptor.

MTL Fieldbus Terminators
MTL Fieldbus Terminators

DIN-rail mounted fieldbus standard terminators for use when termination is not built-in.

Starting at $164.00
MTL Spur Connectors
MTL Spur Connectors

Current limiters for spurs with entity-certified devices or for Zone 0 connections.

Starting at $122.00
MTL F300 Megablock Wiring Hubs
MTL F300 Megablock Wiring Hubs

DIN-rail mounted passive hubs for general purpose, Zone 2 and Division 2 fieldbus and Profibus PA networks.

Starting at $440.00
MTL F2XX Megablock Wiring Hubs
MTL F2XX Megablock Wiring Hubs

DIN-rail mounted passive hubs for general purpose, Zone 1 fieldbus networks, intrinsically safe options.

Starting at $516.00
MTL MA15 and MA15E Surge Protectors
MTL MA15 and MA15E Surge Protectors

Protects electronic equipment and computer networks against the effects of 'noise pollution' induced in mains power supplies.

Some Models in Stock
Starting at $227.00
MTL TP32 Surge Protectors
MTL TP32 Surge Protectors

Specifically designed surge protection for process transmitters and devices on Fieldbus systems.

Some Models in Stock
Starting at $248.00
MTL FP32 Surge Protectors
MTL FP32 Surge Protectors

DIN-rail mounted, 20kA surge protection for fieldbus systems.

$367.00
MTL MA4000 Surge Protectors
MTL MA4000 Surge Protectors

20kA rated, single phase devices that provide protection for AC or DC power supplies with no restriction to the amount of load current.

Starting at $818.00
MTL FS32 Surge Protector
MTL FS32 Surge Protector

Prevents surges and transient over-voltages conducted along the trunk or spurs of fieldbus systems from damaging electronics.

$360.00
MTL AS-i Megablocks
MTL AS-i Megablocks

DIN-rail mounted passive hubs with integrated SpurGuard short circuit protection for AS-i bus networks.

Starting at $748.00
MTL Process Junction Boxes
MTL Process Junction Boxes

Designed for mounting fieldbus wiring components and TI multiplexers, suitable for Zone 2 and Zone 1 intrinsically safe and increased safety applications.

Starting at $925.00
MTL Redundant Fieldbus Barriers
MTL Redundant Fieldbus Barriers

Intrinsically safe, redundant, complete enclosure systems for Foundation fieldbus networks in hazardous areas, up to 6 spur connections.

Starting at $7,199.00
MTL Open-Frame Redundant Fieldbus Barrier
MTL Open-Frame Redundant Fieldbus Barrier

Open-frame, intrinsically safe, redundant, complete enclosure systems for Foundation fieldbus networks in hazardous areas, up to 5 spur connections.

Starting at $6,249.00
MTL F30 Ex ic Adapter
MTL F30 Ex ic Adapter

Provides intrinsically safe Ex ic spur connections for fieldbus networks in Zone 2 hazardous areas, for use with F300 range of Megablock wiring hubs.

$153.00