Rosemount Analytical Model 150 Conductivity Sensor
Flow-through insertion/submersion sensor, high pressure systems 175 psig at 100°F.
Overview
Features
- Temperature Compensation:
- 32 to 250°F (0 to 121°C)
- Pressure Range:
- 50 psi to 150 psi
- Process Connection:
- 1 inch MNPT (front and rear)
- Wetted Materials:
- Electrodes; 316 stainless steel
- Insulators; Tefzel and Viton
Description
The Rosemount Analytical Model 150 Insertion/Submersion Sensor is available in sensor constants of 0.1, 0.5 or 1.0 for conductivity ranges from 0-10 to 0-10,000 μS when used with Models 54eC, 81C, 1054BC, 1181C, 2081C, and 3081C analyzers/transmitters. For optimal loop performance, connect the Model 150 sensor to instrument Models 54eC or 1054BC.
The Tefzel housing has both rear-facing and forward-facing, 1 inch male pipe threads. The sensor can be threaded into a process line or the side of a tank, or be attached to a length of pipe for submersible installation. The Model 150 is available with a 1 inch CPVC tee (Code 16) for flow-through installation. An integral 10 foot cable is supplied for connection to the analyzer/transmitter or junction box.
This sensor is most appropriately used as a set-point detector in applications with a fairly broad control range. This sensor is a good choice for boiler blowdown and open recirculating cooling water. For applications that require high accuracy over a wide range of conductivity, a sensor from the ENDURANCE™ family (Model 400 series) or the toroidal family (Model 200 series) would be the ideal choice.
Documents
Accessories
Cables
Mounting Bracket
Accessories
Please consider these optional accessories.
Applications
This product can be used in the following applications:
Need Help? Call a Flow engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET