Fuji Electric ZKM Oxygen Analyzer
Continuously measures the oxygen concentration in combustion exhaust gases of industrial boilers and furnaces.
Overview
Features
- Measures Oxygen in noncombustible gas
- Measuring method: Zirconium oxide sensor
- Measuring range: 0 to 50 vol% O2 (in 1 vol% O2 steps from 2 to 50)
- Repeatability: Within ±0.5%FS
- Linearity: Within ±2%FS
- Response time: Within 4 to 7 sec, for 90% (from calibration gas inlet)
- Analog output: 4 to 20mA DC or 0 to 1V DC
- Measured gas temperature: −20 to +800ºC (-4 to 1472ºF)
- Gas temp: up to 1500°C with Ejector ZTA
- Measured gas pressure: −3 to +3kPa (−306 to +306mmH2O)
- Field-replaceable sensor element.
- 6 contact outputs
- Combustion efficiency display, auto-calibration, blowdown, RS485 options
- Enclosure options: ZKM1 (IP66/NEMA 4) and ZKM2 (IP67/NEMA 4X)
- Max. cable length between analyzer and detector: 20m (65 ft)
- FM approved
Description
The Fuji Electric ZKM oxygen analyzer utilizes zirconium oxide sensing technology to continuously measure the oxygen concentration in stack gases of industrial boilers and furnaces. The ZKM is ideally suited for combustion management and control. Consisting of the signal processor, input/output and communications, display and system controls, the ZKM requires ZFK8 sensors (and cable) to complete the system.
The Fuji Electric ZKM provides a measuring range of 0 to 50 vol% O2 (in 1 vol% O2 steps from 2 to 50). The zirconium oxide sensor technology provides significant benefits over other type analyzers including excellent stability and repeatability. The ZKM allows for easy maintenance while eliminating the need for a gas sampling device due to the direct insertion design. Sensor diagnostics, recovery functions and other operation and setting functions can be performed at the converter via an easy-to-use, interactive operation panel. The ZKM is available with either an IP66/NEMA 4 (model ZKM1) or IP67/NEMA 4X (model ZKM2) enclosure.
Fuji ZKM oxygen analyzers are suitable as a combustion controllers for industries with high energy consumption to achieve significant savings in energy cost. The oxygen concentration control ensures complete combustion, thus reducing CO2, SOx, and NOx emissions and helping prevent global warming and air pollution.
Applications for the Fuji Electric ZKM oxygen analyzer:
- Steel
- Power
- Petroleum/Petrochemicals
- Ceramics
- Paper/Pulp
- Food
- Textile industries
- Breweries
- Automobile industry
- Combustion facilities such as garbage incinerators
- Medium-to-small sized boilers
Documents
Spec Sheets
- Fuji Electric ZKM Oxygen Analyzer Datasheet PDF (627 KB)
- Fuji Electric Zirconia Oxygen Analyzer Brochure PDF (1.1 MB)
Manuals
- Fuji Electric ZKM Oxygen Analyzer Manual PDF (3.7 MB)
- Fuji Electric ZKM Oxygen Analyzer Service Manual PDF (1.3 MB)
- Fuji Electric ZKM Oxygen Analyzer Communications Manual PDF (368 KB)
- Fuji Electric ZKF8 Oxygen Sensor Manual PDF (1.0 MB)
Other
Links
Accessories
Required Components
These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.
Accessories
Please consider these optional accessories.
Need Help? Call a Temperature engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET