PIE 525 TC & RTD Dual Calibrator with Auto Stepping
Reads RTD and TC outputs and displays temperature.
- PIE 525
Overview
Features
- Direct Temperature Input/Output
- Read or Source in °C or °F for your T/C type and RTD curves
- 8 Standard T/C Types Available
- Types J, K, E, T, R, S, B, N and mV
- Cold Junction Compensated
- 8 RTD Curves Available
- Platinum, Copper, Nickel & ohms
- Custom types and ranges are available
- Auto Stepping
- Accurate to ±0.2°C (±0.4°F) with 0.1° Resolution
- Millivolt accuracy of ±(0.008% + 0.006 mV)
- Resistance accuracy of ±(0.015% + 0.05) ohms
- Guaranteed to Work with ALL Pulsed Instruments
- Works with wide variety of transmitters including popular Rosemount and Honeywell Models
- Compatible with devices using pulsed excitation currents including PLCs, DCS Recorders and all others
- IN RTD mode Automatic Detection of 2, 3, or 4 wire Connections
- No buttons or switches required, 2W, 3W, or 4W indicator is automatic
- A valuable troubleshooting tool
- Easily adjust output by 0.1°
- Pressing down and turning EZ-Dial Knob
- will select a faster dialing speed
- User selectable EZ-Check for 0% and 100% span adjustment
- Store new EZ-Check values by pressing the EZ-Dial knob
- Recall stored minimum and maximum readings
- Uses a standard 9V Alkaline Battery
- Superior battery life of 45 hours under typical continuous usage
- Easy access to battery compartment
- Lightweight and Rugged with a Solid Feel
- Small, tough and protected to 60V
Description
The Practical Instrument Electronics (PIE) 525 T/C & RTD calibrator provides direct temperature calibration to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. Also, the PIE 525 reads RTD & T/C outputs and displays temperature. It is compatible with pulsed systems and transmitters (like the Rosemount 3144) 2, 3, or 4 wire connections are detected automatically. The PIE 525 is a superior replacement for decade boxes, and eliminates the need for lugging around large equipment and the possibility of misreading RTD tables.
Use the EZ-Check Switch to quickly switch between three stored temperatures, 3/mV outputs. It's easy to customize these values to your application. In read mode, the EZ-Check Switch recalls minimum and maximum readings. Store/Clear memory with a press of the EZ-Dial Knob.
The PIE 525 offers the highest performance and functions in its class by exceeding the accuracy and functions of many higher priced T/C & RTD calibrators. It is a low cost solution for checkout and calibration of all T/C & RTD instruments in the field, shop or control room.
Accessories
Need Help? Call a Calibration engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET