Starting at $914.50
  • Usually ships in 3-4 weeks

Overview

Features

  • Dissolved Oxygen (% saturation)
    • Range: 0 to 500%
    • Accuracy at 0 to 200%: ±1% of reading
      or 1% saturation, whichever is greater
    • Accuracy at 200 to 500%: ±8% of reading
  • Dissolved Oxygen (mg/L)
    • Range: 0 to 50 mg/L
    • Accuracy of 0 to 20 mg/L:
      ±0.1 mg/L or 1% of reading, whichever is greater
    • Accuracy of 20 to 50 mg/L: ±8% of reading
  • DO Resolution
    • 0.01 mg/L and 0.1%, or 0.1 mg/L and 1%
      (auto-adjusts based on range)
  • Temperature
    • Range: -5 to 70°C
    • Accuracy: ±0.2°C
    • Resolution: 0.1°C or 0.1°F
  • Rugged optical DO sensor cap pre-installed on new assemblies
  • Military spec (MS) connector and a weighted, stainless steel probe guard
  • Fits in a 1-inch well with cable lengths up to 100 meters
  • 2-year warranty on cable, sensors, and ODO cap

Description

The YSI ODO/T probe and cable assembly pairs with the ProSolo handheld to form a complete sampling system. Featuring integral, digital sensors, the ODO/T is plug-and-play, which minimizes time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognize connected sensors.

Optical dissolved oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less, and holds calibration longer than membrane-covered sensors. A simple, threaded optical cap contributes to ease of maintenance.