Dynasonics TFX Ultra Ultrasonic Flow Meter

Clamp-on ultrasonic flow and energy meters for liquids.

Features

  • Measures clean liquids and those with small amounts of suspended solids or aeration
  • Bi-directional flow measurement system
  • Totalizer with remote reset
  • Modbus RTU over RS485 communications
  • Ethernet connection includes BACNet/IP, EtherNet/IPTM and Modbus TCP/IP protocols
  • Large, easy-to-read digital display
  • Rugged, aluminum enclosure for harsh environments
  • Certified for hazardous area installation in North America and Europe
  • Clamp-on sensor design for reduced installation time
  • No moving parts reduces maintenance
  • 4-20mA output
  • 0-1,000Hz rate pulse and dual alarm outputs (flow meter model only)
  • USB programming port
  • RS485 Modbus network connection

The Dynasonics TFX Ultra Ultrasonic Flow Meter is a clamp-on ultrasonic flow and energy meter that provides accurate and repeatable measurements for full pipe liquid applications such as cooling lines, raw sewage flows, water distribution and processes where system shutdown is impossible. This versatile and accurate meter clamps on to the outside of pipes and does not contact the internal liquid which reduces installation and maintenance time and cost. The TFX Ultra is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.

The Dynasonics TFX Ultra is available in two versions: a stand-alone flow meter, and an energy flow meter used in conjunction with dual clamp-on RTDs. The energy flow meter measures energy usage in BTU, MBTU, MMBTU, Tons, kJ, kW, MW and is ideal for retrofit, hydronic and other HVAC applications.

The TFX Ultra has a wide, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. For pipe/tubing sizes of 2" and lower, the TFX Ultra includes clamp-on transducers mounted and wired directly to the flow meter electronics enclosure. This design provides a convenient installation in areas where the user requires local indication. The TFX Ultra is also available with remote mounted transducers that permit separation of up to 990ft (300m). This design is utilized when pipes are located in areas that are not convenient for viewing, or on piping systems with severe vibration.

The TFX Ultra features a rugged, compact aluminum enclosure, easy-to-read digital display, bi-directional flow measurement, and a totalizer featuring forward, reverse and net total, and Modbus communications. The TFX Ultra offers an optional Ethernet connection as well as a USB programming port. With ease of operation a key component in designing the Series TFX Ultra, Windows based software utility UltraLink is available and compatible with all Dynasonics transit time flow meters to allow users to easily configure, calibrate, and troubleshoot with a notebook PC.

Dynasonics TFX Ultra Ultrasonic Flow and Energy Meter Specifications:

Parameter Details
Liquid Types Clean liquids or those containing small amounts of suspended solids or gas bubbles
Velocity Range Bi-directional to greater than 40 FPS
Flow Accuracy Up to 1% of reading depending upon transducer and flow rate
Temperature Accuracy Option A: 32 to 122°F; Absolute: 0.22°F; Difference: 0.09°F
Option B: 32 to 212ºF; Absolute: 0.45ºF, Difference: 0.18°F
Option C: -40 to 350ºF; Absolute: 1.1ºF, Difference: 0.45ºF
Option D: -4 to 85ºF; Absolute: 0.22ºF, Difference: 0.09ºF
Flow Sensitivity 0.001 FPS
Temperature Sensitivity Option A: 0.03ºF
Option B: 0.05ºF
Option C: 0.1ºF
Option D: 0.03°F
Repeatability 0.5% of reading
Compliance General Safety (all models): UL 61010-1, CSA C22.2 No. 61010-1; (power options A and D only) EN 61010-1
Hazardous Location (power supply options A and D only): Class I Division 2 Groups C, D; Class II and III, Division 2, Groups C, D, F, and G for US/CAN; ATEX II 2 G Ex nA II T4: UL 1604, CSA 22.2 No. 213, EN 60079-0 and EN 60079-15 CE: EN61326-1:2006 on meter systems with integral flow transducers, transducers constructed with twinaxial cable (all transducers with cables 100ft (30m) and shorter) or remote transducers with conduit
Display Two line LCD, LED backlit
Enclosure Type 4 (IP65) Construction: powder-coated aluminum, polycarbonate, stainless steel, polyurethane, nickel-plated steel mounting brackets
Configuration Via optional keypad or PC running ULTRALINK software
Engineering Units Flow Meter and Energy Meter: Feet, gallons, cubic feet, million gallons, barrels (liquid and oil), acre-feet, lbs, meters, cubic meters, liters, million liters, kg
Energy Meter only: BTU, MBTU, MMBTU, Tons, kJ, kW, MW
Inputs/Outputs USB 2.0, RS485, 10/100 Base-T, 4-20mA,
0-1,000 Hz: open-collector (flow meter only), Two Alarm Outputs (flow meter only)

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Dynasonics DTT Transducers for Small Pipes
Dynasonics DTT Transducers for Small Pipes

General purpose, remote transit time transducer sets for small pipes (for pipes up to 2 inches).

Starting at $1,245.00
Dynasonics DTT Transducers for Standard/Large Pipes
Dynasonics DTT Transducers for Standard/Large Pipes

General purpose, submersible or hazardous area remote transit time transducer sets for pipes larger than 2 inches.

Some Models in Stock
Starting at $1,240.00
Dynasonics TFX Ultra RTD Kits
Dynasonics TFX Ultra RTD Kits

Clamp-on RTD kits for the Dynasonics TFX ultrasonic flow meter for energy usage readings.

Starting at $595.00

Cables

Dynasonics D005-2117-003 USB Cable
Dynasonics D005-2117-003 USB Cable

10ft (3m) USB A/B cable for programming the TFX Ultra and DXN ultrasonic flow meters.

$60.00

Accessories

Please consider these optional accessories.

Dynasonics D002-2007-001 Mounting Strap
Dynasonics D002-2007-001 Mounting Strap

36 inch stainless steel mounting strap for TFX series meters.

$17.00
Dynasonics D002-2007-002 Mounting Strap
Dynasonics D002-2007-002 Mounting Strap

30 inch nylon mounting strap for UFX series meters.

$17.00
Dynasonics Acoustic Couplant, Grease
Dynasonics Acoustic Couplant, Grease

Acoustic Couplant (Grease) for Dynasonics Meters.

$50.00
Dynasonics Mounting Rail Assembly
Dynasonics Mounting Rail Assembly

10-inch scaled mounting rail assembly for DTTR transducers.

$145.00
Dynasonics Mounting Track Assembly
Dynasonics Mounting Track Assembly

10- or 16-inch scaled mounting track assembly for DTTN transducers.

Starting at $350.00
Dynasonics D002-2007-004 Tape
Dynasonics D002-2007-004 Tape

72 inches of silicone stretch tape (0 to 200°C) for RTD installation.

$60.00

This product can be used in the following applications:

Here's how some of our customers use this product...

Retro Fit Building Efficiency Monitoring

The Background: Our customer is a bottling plant looking for a way to track the amount of energy used in their hydronic heating and cooling systems.

The Problem: The building and systems are old and the customers wants a non-invasive flow meter with the ability to take in temperature inputs that can then calculate energy usage, also known as BTU monitoring without a costly shut-down of the production line. This provides a way to monitor efficiency and determine if any of the loops are running below a threshold and need to be replaced.

The Solution: We recommended the Dynasonics TFX Ultra Ultrasonic Flow Meter, a clamp-on meter that measures both flow and energy. This solution allows the customer to maintain full operation of the system while they study it’s heating and cooling efficiency.