Dakota Ultrasonics CMX Series Thickness Gauge

Measure material and coating thickness simultaneously, detects pits & flaws in a single mode (PECT).

Features

  • Measurement mode:
    • Pulse-Echo (P-E): pit and flaw, 0.025 to 48in (0.63 to 1219.2mm)
    • Pulse-Echo Coating (PECT): material, coating, pit, and flaw, 0.025 to 48in (0.63 to 1219.2mm)
    • Pulse-Echo Temp Comp (PETP): pit and flaw, auto temperature compensation, 0.025 to 48in (0.63 to 1219.2mm)
    • Echo-Echo (E-E): thru paint and coatings, 0.100 to 6in (2.54 to 152.4mm)
    • Echo-Echo Verify (E-EV): thru paint and coatings, 0.100 to 1.0in (2.54 to 25.4mm)
    • Coating Only (CT): coating thickness, 0.0005 to 0.100in (0.0127 to 2.54mm)
  • Resolution: ±0.001in (0.01mm)
  • Velocity range: 0.0122 to 0.7300 inches/μs (309.88 to 18542 meters/sec)
  • Single and two-point calibration option for material and coating, or selection of basic material types
  • Pulser: dual square wave pulsers
  • Receiver: dual receivers, manual or AGC gain control with 110dB range (limited)
  • Timing: precision TCXO timing with single shot 100MHz 8-bit, ultra low power digitizer
  • Pulse repetition frequency: 250Hz
  • 4Gb internal memory
  • USB-C port
  • Factory calibration traceable to NIST and MILSTD-45662A
  • 2-year limited warranty

What's in the Box

  • Transducer (P/N T-102-2900)
  • Couplant
  • Manual
  • Plastic carrying case
  • Certificate of calibration
  • AA Batteries

The Dakota Ultrasonics CMX Series thickness gauge measures material and coating thickness simultaneously, while still detecting pits and flaws in a single mode (PECT). The CMX gauge features auto probe zero, auto probe recognition, and auto temperature compensation. Selectable large digits and B-scan display options, up to 64 custom user-definable setups, selectable transducer table for precision linearity, and material and coating calibration options are also available.

The standard thru paint mode is still included and ongoing. Switch between modes, according the transducer recognized or manually selected. The CMX also offers a 5-position, 12dB gain switch, which allows the user to adjust to certain material types and common but difficult application scenarios. A built-in TDG (time dependent gain) feature is incorporated into the transducer list for use with attenuative materials. The CMX gauge's small, portable extruded aluminum body provides extra durability. The gauge features USB-C connectivity, 4GB internal SD memory with file system, screen capture to .tif, and DakView java-based PC or MAC OSX software.

Required Transducers

At least one transducer is required for this product

Dakota NDT Dual Element Transducers
Dakota NDT Dual Element Transducers

Dual element transducers for Dakota NDT thickness gauges.

Some Models in Stock
Starting at $330.00

Accessories

Please consider these optional accessories.

Dakota NDT Couplant
Dakota NDT Couplant

Acoustic couplant to apply to the sensor face to ensure a complete acoustic pathway between the sensor and material being measured.

Some Models in Stock
Starting at $20.00
Dakota NDT X-000-0001 5 Step Calibration Block
Dakota NDT X-000-0001 5 Step Calibration Block

5 step calibration block from 0.100 to 0.500 inch, made of 4340 steel.

In Stock
$235.00
Dakota NDT X-000-0002 4 Step Calibration Block
Dakota NDT X-000-0002 4 Step Calibration Block

4 step calibration block from 0.250 to 1.0 inch, made of 4340 steel.

In Stock
$235.00
Dakota NDT Carrying Case
Dakota NDT Carrying Case

Wood carrying case for Dakota NDT calibration blocks.

$60.00
Dakota NDT Single LEMO 00 to BNC Cable
Dakota NDT Single LEMO 00 to BNC Cable

4 foot cable for the Dakota Ultrasonics CMX, FX70 Series & PMX2-DL.

$70.00
Dakota NDT Dual LEMO 00 to Armored Microdot Cable
Dakota NDT Dual LEMO 00 to Armored Microdot Cable

4 foot cable for the Dakota NDT PMX2-DL, UMX-2, MX1-DL, MX2-DL & CMX series.

$175.00
Dakota NDT Dual LEMO 00 to High Temperature Armored Microdot Cable
Dakota NDT Dual LEMO 00 to High Temperature Armored Microdot Cable

4 foot cable for the Dakota NDT PMX2-DL, UMX-2, MX1-DL, MX2-DL & CMX series.

$195.00
Dakota NDT Single LEMO 00 to Microdot Cable
Dakota NDT Single LEMO 00 to Microdot Cable

Cable for Dakota Ultrasonics FX70, FX80, PMX2-DL, CMX, BT1-DL, and BT2-DL series.

Starting at $80.00
Dakota NDT Single LEMO 00 to LEMO 00 Cable
Dakota NDT Single LEMO 00 to LEMO 00 Cable

Cable for Dakota Ultrasonics CMX, PMX2-DL, FX70, and FX80 series.

Starting at $80.00
Dakota NDT Dual LEMO 00 to LEMO 00 Cable
Dakota NDT Dual LEMO 00 to LEMO 00 Cable

Cable for Dakota NDT CMX, MX1-DL, MX2-DL, FX70 and FX80 series.

Starting at $120.00
Dakota NDT Instrument Case
Dakota NDT Instrument Case

Nylon case with clear plastic front, snap closure, and neck strap.

$90.00

This product can be used in the following applications: