Bently Nevada 3500/64M Dynamic Monitor
4 channel monitor accepts input from high temperature pressure transducers and uses this input to drive alarms.
Overview
Features
- Accepts from 1 to 4 pressure transducer signals
- Input impedance:
- 3 wire: transducer 10 kΩ
- 2 wire: 1.5 MΩ to 3.5 MΩ typical
- Dynamic pressure: 100 mV/psi (1.45 mV/mBar)
- Front panel LEDs: OK, TX/RX, Bypass
- High mode and low modes available
- Programmable alarm time delays
Description
The Bently Nevada 3500/64M Dynamic Monitor is a single slot, four channel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor's one measured variable per channel is band pass dynamic pressure.
The 3500 Rack Configuration Software configures the band pass corner frequencies along with an additional notch filter. The monitor provides a recorder output for control system applications. The primary purpose of the 3500/64M Dynamic Pressure Monitor is to provide the following:
- Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms
- Essential machine information for operations and maintenance personnel
Documents
Accessories
Need Help? Call a Calibration engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET