Panametrics MTS6 OEM Moisture Analyzer
Single-channel OEM analyzer designed for permanent installation measures moisture in compressed air and gases.
- By Panametrics
-
Some models in stock. View available part numbers.
Overview
Features
- Low-cost, single-channel hygrometer for OEM applications
- Compatible with M Series moisture probe or VeriDri moisture transmitter
- NEMA 4 weatherproof membrane front display/keypad
- Built-in isolated current or voltage analog output
- MicroSD card for logging data up to 32 GB
- Panel-mount and board-level configurations
- Alarm Relays
- One fail-safe fault relay
- Two standard Form C relays SPDT, rated for 3 A at 250 VAC/30 VDC
- Set to any level within the range of the instrument; programmable from the front panel
- 128 x 64 matrix LCD display
- Displays dew point temperature in °F, °C or sensor signals for diagnostics
- Standard switch-selectable outputs
- 0 to 2 V, 10kΩ minimum load resistance
- 0 to 20 mA, 400Ω maximum series resistance
- 4 to 20 mA, 400Ω maximum series resistance
- User-programmable within the range of the instrument and the corresponding sensor or transmitter
Description
The Panametrics Moisture Target Series 6 is a single-channel analyzer that measures moisture in compressed air and gases. Designed for permanent installations the MTS6 can significantly enhance the performance of OEM products by allowing closed-loop control of moisture. It is used in conjunction with M Series moisture probe or VeriDri moisture transmitter for air/gas dryer original equipment.
The microprocessor-based MTS6 accurately tracks fast-changing process conditions and displays dew/frost point temperature in °F or °C on an LCD. Dew/frost point is also available as an analog voltage or current output, and the Moisture Target Series 6 features built-in isolation to ensure the integrity of signals to remote devices. The unit also features two Form C alarm relays for high and low dew/frost point limits. The microprocessor-based electronics and six-button keypad combine to make selection of analog output zero and span, alarm setpoints fast and easy, and entry of calibration data sample.
The panel-mount MTS6 comes in a compact DIN standard meter housing for applications where space is at a premium. The case slides directly into the panel cutout, and is held in place from the rear by captive screws.
Documents
Accessories
Probes
Accessories
Please consider these optional accessories.
In Stock
Part Number | Price | Available | |
---|---|---|---|
MTS6-3-3-2-0 |
$3,980.00 | 1 in stock |
Interested in Other Part Numbers?
Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Call for availability". Click here to select options
Need Help? Call a Calibration engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET