Yokogawa EY200 Digital Earth Tester
Measure by 3-pole or 2-pole method, one touch button and dedicated test lead.
Overview
Features
- Small and lightweight
- Dust and drip proof (IEC60529 IP54)
- Measuring range:
- Earth Resistance; 2000Ω
- LSD; 0.01 to 1Ω
- Earth Voltage; 200V
- Operating Temp: 32 to 104°F (0 to 40°C)
- Earth resistance accuracy ±2%
- Earth voltage accuracy ±1%
Description
The Yokogawa EY200 Digital Earth Tester uses 3-pole or 2-pole measuring methods. To use the 3-pole method connect the earth/ground electrode (E) and auxiliary spikes (P, C) to the main body using the accessory test lead. Put apart 5 to 10 m between E and P, and P and C, respectively. E, P, and C should be approximately in a line.
The 2-pole measuring method is a simplified method and can be used if there is an almost perfectly earth/ground object such as a lead or iron water-pipe (plastic pipes cannot be used) or if there is an object with a known value of earth resistance, near the measurement site.
Accessories
Test Leads
Cases
Accessories
Please consider these optional accessories.
Need Help? Call a Temperature engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET