GF Signet 5500 Flow Monitor

The GF Signet 5500 flow monitor is an instrument that comes fully equipped with all of the basic tools needed for monitoring and controlling a flow system. The GF Signet 5500 flow monitor's analog dial enables the user to easily read instantaneous flow rate, while the backlit LCD is useful for calibration, set-up, and displaying totalized flow volume. The GF Signet 5500 flow monitor features a standard 1/4 DIN package and removable wiring terminals. Power the GF Signet 5500 flow monitor with any standard 24-volt power supply (AC or DC).

Connect the GF Signet 5500 flow monitor to any one of GF Signet's wide array of flow sensors, then consider which output features are best for your application. The GF Signet 5500 flow monitor features two dry-contact relays which can be configured for High or Low alarm operation or set to pulse operation for chemical dosing applications.

Use the GF Signet 5500 flow monitor's internally powered 4 to 20mA output, programmable from the front keypad, to send the flow information to any PLC or data logger. If you use all of these output features, you still have two more output pulse terminals, one at sensor frequency and the other triggered by the totalizer. And just for added convenience, the GF Signet 5500 flow monitor features a resettable totalizer can be reset by a remote hard-wired switch, up to 30m (100 ft) or from the front keypad.

Applications for the GF Signet 5500 Flow Monitor

• Waste water flow accumulation
• Water treatment systems
• Filtration systems
• Feed pump pulsing
• Fertigation
• Irrigation
• Commercial pools & Spas
• Groundwater remediation
• HVAC