E+H CPY7B Electrolyte Reservoir
Storage for liquid KCl, required for use with CPS41E, CPS42E, and CPS47E digital sensors.
Overview
Features
- Liquid KCl filled
- Unpressurized or pressurized applications
- 11 bar abs (160 psi) process pressure at 86°F (30°C)
- Polycarbonate pressure vessel
- EPDM o-ring
- PTFE hose
- ~200ml pressure vessel volume
- 90mm pressure vessel diameter
- Safe and reliable pH measurements
This product is an accessory for the following products:
Description
The Endress+Hauser CPY7B electrolyte reservoir is designed for pH and ORP electrodes using liquid electrolyte. It supports pressurized and unpressurized applications and is suitable for measuring in low-conductivity media (below 100 µS/cm), highly viscous or sticky media, media prone to deposits, and media containing strong electrode poisons. Its potentiometric measuring principle supports reliable electrode operation under these conditions.
The CPY7B reservoir has an approximate capacity of 200 mL and is constructed with a polycarbonate pressure vessel, EPDM O-ring, and PTFE hose. Its overall dimensions are 236 mm (9.29 in) in height and 99 mm (3.90 in) in diameter, with a pressure vessel diameter of approximately 90 mm. The maximum process pressure is 11 bar absolute at an ambient temperature of 30°C (160 psi at 86°F).
Accessories
Required Components
These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.
Need Help? Call a Flow engineer at 1-800-884-4967
We're open 8:00 am to 5:00 pm ET