Edgetech SENTRY Compressed Air Monitor
Constantly monitors pressure and dew/frost point temperature, detects upset conditions in compressed air systems.
Overview
Features
- Detects upset conditions in compressed air systems
- Compressed Air Monitoring and Alarm System
- Turn key measurement
- Strobe lamp and pulsing audible alarms
- Measuring ranges:
- Std dew/frost point: -40 to 203°F (-40 to 95°C)
- Low dew/frost point: -76 to 203°F (-60 to 95°C)
- Pressure: up to 400 psia (0 to 27.6 bar)
- Accuracy:
- Dew/Frost Point: ±1°C or ±2°C
- Pressure: At 25°C, ±1 mbar from 600 to 1200
- mbar; over -40°C to +125°C range, ±5 mbar
- IP65 water resistant/dust tight enclosure
Description
The Edgetech SENTRY Compressed Air Monitor features a smart multi-sense probe that continuously monitors the dew/frost point and pressure of compressed air systems to detect compressor or dryer failures and system pressure leaks. The SENTRY features a strobe lamp and pulsing horn plus an alarm relay contact that activate when a programmable, low pressure or high dew/frost point alarm trip point is detected. Either condition triggers the alarms. It also has a local display of the measured pressure and dew/frost point of the compressed air system plus 4 to 20 mA analog outputs, one each for measured pressure and dew/frost point at atmospheric pressure. The SENTRY is a complete system, ready for out-of-the-box installation.
Applications for the SENTRY include:
- Compressed air headers
- Point of use compressed air
- Dry air systems for critical process
- Monitoring fluidized bed dryers
- Monitoring instrument air systems
- Pharmaceutical packaging
- Laboratories and clean rooms
- Sensitive product storage
- Monitoring purge delivery systems
Documents
Accessories
Required Components
These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.
Accessories
Please consider these optional accessories.
Applications
This product can be used in the following applications:
Need Help? Call a Calibration engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET