Martel PSC-4000 Process Calibrator

Portable process signal calibrator.

Features

  • Reads and simulates process control signals
  • Memory for three (3) calibration points in each range
  • Multiple input/output ranges for current and voltage modes
  • Built-in 24 VDC source for powering two-wire transmitters
  • Accuracy of 0.025% FS ±1 LSD
  • Large 32 character dot matrix display

The portable Martel PSC-4000 process calibrator is a hand-held, full function voltage and current calibrator with the capability to both read and simulate common process control signals.

The Martel PSC-4000 process calibrator incorporates multiple input/output ranges for both current and voltage operating modes. When operated in the current mode, the Martel PSC-4000 process calibrator can source, simulate, or read over a 0 to 24 mA range with 0.01 mA resolution. The Martel PSC-4000 process calibrator can also supply 24 VDC to power a two-wire transmitter while simultaneously reading back its output both in milliAmps or as a % of full scale. When operated in the voltage range, the Martel PSC-4000 process calibrator can read or source over two ranges, 0 to 20.00 V or 0 to 200.0 mV.

For your convenience, you can store up to three (3) calibration points in the memory of your Martel PSC-4000 process calibrator for each voltage or current range. These calibration points are non-volatile and will remain in memory until the user changes them.

Accessories Included with the Martel PSC-4000 Process Calibrator

  • Test leads
  • A carrying case
  • 4 AA batteries
  • A NIST Certificate
  • An instruction manual