Badger Meter M1000 Electromagnetic Flow Meter

Name: Badger Meter M1000 Electromagnetic Flow Meter
Price: 1974.0 USD
Availability: BackOrder

Available in sizes from 1/4 to 10 inches with processor-based signal conversion, accurate to ±0.3%.

Starting at $1,974.00

View Company Reviews

Manufactured

By Badger Meter

Includes

FREE Ground Shipping (some models excluded)
FREE Lifetime Tech Support

Availability

Call for availability

Product Manual Product Specs

Features

LCD display with programming via 3 buttons
Minimum conductivity of 5μS/cm
- 20μS/cm for demineralized water
Up to 232 psi (16 bar) nominal pressure
Fluid temperature depends on material & mounting
- Max of 178°F with hard rubber (meter or remote)
- Max for PTFE is 212°F (meter) or 302°F (remote)
Uni-directional or bi-directional flow
Analog output
- 0/4 to 20mA
- 0 to 10mA
Pulse output
- 2 open collectors
- Passive 32VDC
- 0 to 100Hz (100mA)
- 100 to 10,000Hz (20mA)
- Optional active
Max frequency output of 10kHz (open collector)
RS232, RS422, RS485 Modbus RTU communications
Min-Max flow alarm

The Badger Meter M1000 electromagnetic flow meter has been specifically designed for industrial water/ wastewater, machinery plants, vehicles and batching process applications. The operating principle of the M1000 electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.

The M1000 mag meter also has an "empty pipe" detection feature. This is accomplished with a third electrode positioned in the meter between twelve o'clock and one o'clock. If this electrode is not covered by fluid for a minimum of five-seconds, the meter will display an "empty pipe" condition. When the electrode again becomes covered with fluid, the error message will disappear and the meter will continue measuring.