Overview

Features

  • Measure and simulate T/Cs, RTDs, Ohms, current, voltage, frequency and pressure; source pulse trains
  • Simple, straight forward, Intuitive user interface
  • New ClearBrite™ Graphic Display
  • New streamlined case design
  • Easy to learn yet powerful 3 Key Martel Menu System
  • Maintain calibration data for 50 instruments in non-volatile memory
  • Print calibration certificates without PC
  • Communications port compatible with BetaPort-P pressure modules
  • Fuseless Protection to 250 VAC
  • All source modes can be programmed with dedicated setpoints
  • Built-in 250 Ohm resistor for HART compatibility with smart transmitters and PLCs
  • Direct entry of custom RTD coefficients
  • Meets CE Requirements and is designed to IEC 1010 safety standards

Description

The Martel DMC-1410 documenting multi-function calibrator provides a feature set unmatched in high accuracy, hand-held calibrators in its price range. The DMC-1410 provides the functions and accuracy associated with fixed installation, laboratory instruments, and has everything needed for virtually any calibration task. What makes this versatile calibrator best in class is the ability to fully document any calibration easily while performing the normal job - no special software is required.

The Martel DMC-1410 can measure and simulate thermocouples, RTDs, current, voltage, frequency and pressure, and source pulse trains. Results are shown of the high contrast ClearBrite graphic display which features a vivid white backlight that makes the display easy to read in all light conditions. Martel's easy to learn yet powerful 3 key menu structure provides a highly intuitive yet powerful operator interface. A communications port compatible with BetaPort–P pressure modules is provided, as is an isolated milliamp/Volt read-back circuit.

The Martel DMC-1410 documenting multi-function calibrator features the ability to test for pass/fail criteria, capture both "as found" and "as left" data while maintaining calibration data for 50 instruments in its nonvolatile memory. The Martel DMC-1410 even prints calibration certificates right in the field, with no PC needed, using the optional OTS-100 portable certificate printer.

Our Martel DMC-1410 documenting multi-function calibrators ship complete with:

  • (4) AA Alkaline batteries
  • Full Rubber boot
  • (3) Test leads
  • DVD/CD based video training
  • Instruction manual
  • RS-232 cable
  • USB to serial adapter
  • USV support software
  • NIST Certificate with calibration data

DC Voltage

Display Range Accuracy
Isolated (upper display) 0.000 to 30.000 V 0.01% ± 2 mV
Non-isolated (lower display) 0.000 to 20.000 V 0.01% ± 2 mV
Source (lower display) 0.000 to 20.000 V 0.01% ± 2 mV

DC Current

Display Range Accuracy
Isolated (upper display) 0.000 to 24.000 mA 0.01% ± 2 µA
Non-isolated (lower display) 0.000 to 24.000 mA 0.01% ± 2 µA
Source (lower display) 0.000 to 24.000 mA 0.01% ± 2 µA

Frequency

Display Range Accuracy
Measurement 2.0 to 600.0 CPM 0.05% ± 0.1 CPM
1.0 to 1000.0 Hz 0.05% ± 0.1 Hz
1.00 to 10.00 kHz 0.05% ± 0.01 kHz
Source 2.0 to 600.0 CPM 0.05%
1.0 to 1000.0 Hz 0.05%
1.00 to 10.00 kHz 0.125%
1.00 to 10.00 kHz 0.125%

Resistance

Display Range Excitation Current Accuracy
Measurement 0.00 to 400.0 Ω 0.015% ± 0.03 Ω
401.0 to 4000.0 Ω 0.015% ± 0.3 Ω
Source 5.0 to 400.0 Ω 0.1 to 0.5 mA 0.015% ± 0.1 Ω
0.5 to 3 mA 0.015% ± 0.03 Ω
401 to 1500 Ω 0.05 to 0.8 mA 0.015% ± 0.3 Ω
1500 to 4000 Ω 0.05 to 0.4 mA 0.015% ± 0.3 Ω

MilliVolts

Display Range Accuracy
Read -10.000 to 75.000 mV 0.015% ± 10 µV
Source -10.000 to 75.000 mV 0.015% ± 10 µV

Temperature

Device Types (see brochure for ranges and accuracies)
RTD measurement/source PT385, 10 Ω; PT385, 50 Ω; PT385, 100 Ω; PT3926, 100 Ω; PT3916, 100 Ω; PT385, 200 Ω; PT385, 500 Ω; PT385, 1000 Ω; NI120; Cu10; Cu50; Cu100; YSI400
mV/thermocouples J, K, T, E, R, S, B, C, XK, BP, L, U, N

Pressure

Range Accuracy
Pressure measurement via BetaPort-P pressure modules (requires BPPA-100 Pressure Module Adapter). See brochure for ranges and accuracies

General Specifications

Power Supply 4 x AA batteries, alkaline or optional rechargeable
Display High contrast 128 x 64 pixel addressable graphic LCD w/daylight backlight
Serial Communications ASCII, RS-232 (requires optional Martel 1919069 serial cable or 1919896 USB cable)
CE-EMC EN50082-1 and EN55022: 1994 Class B
Safety CSA C22.2 No. 1010-1: 1992
Protection IP54; Protected against misconnection to 250 VAC/VDC
Operating Temperature -10 to 50°C
Dimensions 8.5 x 4.8 x 2.1"
Weight 1.8 lbs