Fluke 725 Multifunction Process Calibrator

Wide pressure range selection, up to 1500 psia, digital communication to calibrators.

Differential pressure modules in 5 models with ranges up to 15 psi, digital communication to calibrators.

Wide pressure ranges available, up to 300 psi, digital communication to calibrators.

±0.0175% reference uncertainty, 6-month and 1-year specifications, digital communication to calibrators.

±0.0175% reference uncertainty, ranges up to 10000 psi (700 bar), digital communication to calibrators.

Choose -5 psi (-350 mBar) or -15 psi (-1 bar) range, digital communication to calibrators.

Wide variety of pressure ranges available, up to 10,000 psi, with digital communication to calibrators.

9.84ft (3m) of thermocouple wire and 1 pair of male/female mini-connectors for 500°F (260°C) maximum continuous temperature.

9.84ft (3m) of thermocouple wire and 1 pair of male/female mini-connectors for 500°F (260°C) maximum continuous temperature.

39 inch length type-K thermocouple for general purpose applications from -40 to 500°F (-40 to 260°C).

SureGrip immersion type-K thermocouple for use in liquids and gels from -40 to 1994°F.

SureGrip type-K thermocouple for use in air and non-caustic gas measurements from -40 to 1500°F.

SureGrip type-K thermocouple suitable for the food industry, liquids and gels from -40 to 500°F.

SureGrip type-K thermocouple with tapered tip for use in air, non-caustic gas, and surface applications from -40 to 1500°F.

SureGrip type-K thermocouple for flat or slightly curved surfaces from -196.6 to 1112°F.

19.5 inch flexible Velcro cuff temperature probe for 302°F (150°C) maximum with 20 inch cable and 0.5in pin connector.

SureGrip clips inlcude one pair (red & black) of small (9.5mm), insulated, nickel plated jaws.

One pair (red & black) of nickel plated clips with SureGrip, hook opening of 6.4mm at the front and 2mm at the base.

Comfort grip probes with silicone insulated, right-angle test leads.

SureGrip electrical test lead set includes alligator clips, test probes, and right to right silicone leads.

Very small, 1mm, tips to access hard to reach test points.

One pair (red & black) of silicone test leads with right shrouded 4mm banana plugs and 2mm probe with 4mm removable lantern tip.

One pair (red & black) of flexible silicone insulated leads with sharp needle point tips adjustable from 0 to 76mm.

One pair (red & black) of 60in silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C).

One pair (red & black) of SureGrip silicone insulated leads with straight connectors on both ends and a pair of female couplers.

Three sets of gold-plated and two sets of stainless steel tips, replacements for TL910 probes.

Three pairs (red & black) of push-on adapters: IC test adapters, extended probe tips, & alligator clips with 0.3in (7.6mm) max opening.

Heavy duty construction with 10 slots for wires up to 0.3 inches (8mm) in diameter.

One pair of red and black nickel-plated, SureGrip pincers which open to 0.2in (5mm).

Pierces 0.01 to 0.06in (0.25 to 1.5mm) insulated wire.

One pair (red & black), for probing high density components or boards.

One pair (red & black), with 0.16in (4mm) banana-style spring contacts and nickel-plated brass ends.

One pair (red & black) of slender, stainless steel probes for accessing closely-spaced or recessed terminals.

Pouch with red & black pairs of test leads, alligator clips, test probes, tip extenders, hook & pinch clips, IC probe tips, & bare spade lugs.

Includes all the SureGrip leads, clips, and probes in a handy roll-up pouch.

Includes small and large SureGrip alligator clips, lantern tip probes, and silicone test leads in a soft case.

Insulated test probes, extenders, and silicone right angle to straight test leads for high energy environments.

Three flexible socket probes and 0.8in (20mm) alligator clip for use on motor and three phase sockets.

0.16 to 0.75 inch (4 to 19mm) adjustable length test tips for use in different measurement environments.

One pair (red & black) of 35.43 inch (90cm) PVC insulated leads with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

One pair (red & black) of 23.62 inch (60cm) PVC insulated leads with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

3 pairs of PVC insulated leads, 23.62, 35.43, & 47.24in (60, 90, & 120cm), with multi-stacking, nickel-plated 0.16 inch (4mm) banana plugs.

Zippered carrying case with detachable external pouch.

Zippered, polyester carrying case with padding, hand strap & inside pocket.

Rugged ballistic cloth with heavy duty hardware, including a steel reinforced frame.

Adjustable padded space with a moveable Velcro divider for protection of two test tools.

Polyester carrying case with movable internal divider and outer zippered pouch with elastic strap and mesh accessory retainer.

2 universal hanger clips, hook, 9 inch loop strap, and a strong magnet.

Bright white LED with 120 hours of life on two 3V watch batteries that easily attaches to any Fluke test probe.

TP220 industrial test probes, TP280 probe extenders, TL224 insulated test leads, & L200 probe light in a foldable soft pouch.

L200 probe light, TL71 premium DMM test lead set, and C75 carrying case.

Includes L200 probe light and TP280 test probe extenders.

Durable high-quality polyester, injection molded plastic bottom base, six storage compartments.