Fluke Calibration Bath Fluids
Bath Fluids for Constant Temperature Baths.
Overview
This product is an accessory for the following products:
Description
Finally, there's a convenient source for small quantities of bath fluids for any temperature range. Why pay for more than you need?
Fluke Calibration's full line of bath fluids covering temperature ranges from –100 to 550°C.
Viscosity, volatility and other properties that change with temperature affect the performance of fluids in controlled baths and circulators. Fluke Calibration has tested and used each of the fluids we sell. Each fluid remains at a low enough viscosity to be adequately pumped or stirred. Whether your application is industrial or critical lab calibration work, Fluke Calibration fluids give you top performance and stability.
For temperature ranges too high for oils, Fluke Calibration has bath salt with a viscosity in the molten state similar to the viscosity of water. For your convenience, it is shipped in a granular form, making it easy to fill your bath.
Between its melting point of 150 and 550°C, this salt has the highest temperature stability and uniformity available in a bath fluid. It does not smoke like oils or give off dust like "sand" or fluidized alumina baths.
Documents
Spec Sheets
- Fluke Calibration Bath Fluids Halocarbon Material Safety Datasheet PDF (24 KB)
- Fluke Calibration Bath Fluids HFE Material Safety Datasheet PDF (41 KB)
- Fluke Calibration Bath Fluids Dynalene Material Safety Datasheet PDF (167 KB)
- Fluke Calibration Bath Fluids Dow Ethylene Glycol Material Safety Datasheet PDF (20 KB)
- Fluke Calibration Bath Fluids Dow Corning 5 CST Material Safety Datasheet PDF (43 KB)
- Fluke Calibration Bath Fluids Dow Corning 10 CST Material Safety Datasheet PDF (50 KB)
- Fluke Calibration Bath Fluids Dow Corning 20 CST Material Safety Datasheet PDF (43 KB)
- Fluke -Calibration Bath Fluids Dow Corning 50 CST Material Safety Datasheet PDF (44 KB)
- Fluke Calibration Bath Fluids Dow Corning 550 Material Safety Datasheet PDF (37 KB)
- Fluke Calibration Bath Fluids Dow Corning 210H Material Safety Datasheet PDF (37 KB)
- Fluke Calibration Bath Fluids Dow Corning 710 Material Safety Datasheet PDF (41 KB)
- Fluke Calibration Bath Fluids Drakeol LT Mineral Oil Material Safety Datasheet PDF (1.9 MB)
- Fluke Calibration Bath Fluids Tempering A-HTS Material Safety Datasheet PDF (257 KB)
- Fluke Calibration Bath Fluids Datasheet PDF (47 KB)
- Fluke Calibration Article on Selecting Bath Fluids (108 KB)
Links
Need Help? Call a Temperature engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET