Aalborg GFM Mass Flow Meters
Thermal mass flow meter for clean gases, flow ranges from 0 to 10 SCCM to 0 to 1000 SLPM, replaces the AA30-A.
Overview
Features
- Rigid metallic construction
- Accuracy
- GFM 17, 37 and 47: ±1.0% of full scale
- GFM 57, 67 and 77: ±1.5% of full scale
- Maximum pressure
- GFM 17, 37 and 47: 1000 PSIG (70 bar)
- GFM 57, 67 and 77: 500 PSIG (34.5 bar)
- Leak integrity maximum to the outside environment
- 1 x 10-9 smL/sec of helium
- NIST traceable certification
- Built-in tiltable LCD readout
- 0-5VDC & 4-20mA signals
- Circuit protection
- Can be used as a portable device
- Engineering units or 0 to 100% displays
- Totalizer option
- 12-26VDC input power
Description
The Aalborg GFM mass flow meter is a low cost solution to thermal mass flow metering for gases. The design of the Aalborg GFM mass flow meter combines the convenience and accuracy of a conventional mass flow meter with low costs previously unattainable.
Each Aalborg GFM mass flow meter incorporates an advanced straight tube sensor in conjunction with flow passage elements constructed of aluminum and brass for non-corrosive gases or 316 stainless steel for corrosive applications.
Compact, self-contained Aalborg GFM mass flow meters are designed to read flow rates of gases. The rugged design coupled with instrumentation-grade accuracy provides versatile and economical means of flow control. Aluminum or stainless steel models with readout options of either engineering units (standard) or 0 to 100% displays are available.
The mechanical layout of the Aalborg GFM mass flow meter's design includes an LCD readout built into the top of the transducer. This readout module is tiltable over 90 degrees to provide optimal reading comfort. It is connected to the transducer by a standard modular plug, and is also readily removable for remote reading installations. Transducers without LCD readout are offered for OEM applications.
Aalborg GFM mass flow meters are available with flow ranges from 10 sccm to 1000 sL/min N2. Gases are connected by means of 1/4", 3/8", and 1/2" compression fittings and 3/4" FNPT fittings. Optional fittings are available. The Aalborg GFM mas flow meter may be used as a benchtop unit or mounted by means of screws in the base.
Transducer power supply ports are fuse and polarity protected.
The Aalborg GFM mass flow meter offers a leak integrity of 1 x 10-9 smL/sec of helium maximum to the outside environment.
Principles of Operation
Metered gases are divided into two laminar flow paths, one through the Aalborg GFM mass flow meter's primary flow conduit and the other through a capillary sensor tube. Both conduits are designed to ensure laminar flows; therefore, the ratio of their flow rates is constant.
Two precision temperature sensing windings on the sensor tube are heated, and when flow takes place, gas carries heat from the upstream to the downstream windings. The Aalborg GFM mass flowmeter's resultant temperature differential is proportional to the change in resistance of the sensor windings.
The Aalborg GFM mass flow meter has a Wheatstone bridge design to monitor the temperature dependent resistance gradient on the sensor windings which is linearly proportional to the instantaneous rate of flow. Output signals of 0 to 5Vdc and 4 to 20mA are generated indicating mass molecular-based flow rates of the metered gas.
Flow rates are unaffected by temperature and pressure variations within stated limitations.
Documents
Accessories
Power Supplies
Accessories
Please consider these optional accessories.
Applications
Here's how some of our customers use this product...
Compressed Air Monitoring in an Industrial Facility
The Background: Our customer is an industrial facility looking to eliminate inefficiencies in their compressed air system. Energy costs for compressed air are significant in many industrial facilities and inefficiency drives those costs higher.
The Problem: It is an older facility which is known to have leaks in the system. Additionally, some employees are not properly shutting down equipment during breaks or at the end of shifts. The largest hurdle for the customer is how to identify areas where improvements can be made given the significant length of air lines that exist in the building.
The Solution: We supplied the customer with multiple Aalborg GFM series thermal mass meters to monitor their air lines. Over time they were able to pinpoint which employees needed additional training on proper shut down and which lines needed to be repaired or replaced. Not only did this save them thousands of dollars in wasted energy, it saved them thousands of dollars by not replacing air lines that were structurally sound.
Need Help? Call a Flow engineer at 1-800-884-4967
We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET
