Hedland EZ-View Liquid Flow Meters

Polysulfone variable area flow meters for oil and water.

Hedland EZ-View Flow Meter for Oil and Water
Hedland Variable Area Flow Meters Product Video

Starting at $88.00

View Company Reviews

Manufactured

By Hedland

Includes

FREE Ground Shipping on orders of $1,000 or more
FREE Lifetime Tech Support

Availability

Some models in stock. View available part numbers.

Product Manual Product Specs (4 Files)

Features

Polysulfone plastic body, piston, and cone
½ to 2 inch ports
Accuracy within ±5% full scale
325 psi (22 bar) for oil & water
Up to 250°F (121°C)
0.5-100 GPM (2-380 LPM) for oil & water
Standard calibration:
0.876 specific gravity for oil;
1.0 specific gravity for water
Applications: Water Cooling Systems, Chemical and Water Systems, Reverse Osmosis Systems

The Hedland EZ-View Liquid Flow Meters is a variable area flow meter constructed of high-impact polysulfone plastic to provide a low cost alternative for your flow monitoring requirements. These simple but rugged flow meters contain a minimum number of moving parts offering reliable and trouble-free flow measurement.

Hedland polysulfone variable area flow meters can be used in applications in which the temperature ranges from 32°F to 250°F (0°C to 121°C). These Hedland flow meters are pressure rated for 325 psi/22.4 bar maximum.

Hedland EZ-View Flow Meters for Oil and Water can be used for the flow measurement of oil or water. Choose the port size and fitting material depending on your application. Five port sizes are available between 1½ to 2 inches with brass or PVC fittings. Six port sizes are available between ½ to 1 inch with brass, PVC, or stainless steel fittings.

Operating Principle

A precision-molded, sharp-edged orifice forms an annular opening with the metering cone. Flow through the meter creates a pressure differential across the orifice, moving the piston against the spring in direct proportion to the rate of flow. The calibrated spring opposes flow in the forward direction. This spring decreases viscosity sensitivity and allows the flow meters to be used in any position, including inverted. The indicated flow rate is measured by viewing the red indicator line on the piston relative to the pre-calibrated numerical scale, mounted on the outer surface of the transparent body.

Hedland EZ-View Flow Meter for Oil and Water Features:

No special piping or flow straighteners needed
Easy to install in any position
No electrical connections
Direct reading indication
Relatively insensitive to shock and vibration

Spec Sheets

Other

Manuals

Hedland EZ-View Flow Meter for Oil and Water Manual PDF (2.8 MB)

Required Components

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

Hedland EZ-View Flow Alert Switches

Latching or reed flow switches for 1/2 to 2 inch EZ-View flow meters.

Starting at $65.00

This product can be used in the following applications:

Part Number	Nominal Port Size/ Fittings	Medium	Flow Range	Body Material	Price	Available
H621-010 Show Full Configuration	1" NPTF (dryseal) male, plastic polysulfone fitting	Water (1.0 S.G.)	1.0-10 GPM	Polysulfone	$88.00	2 in stock
H621-028 Show Full Configuration	1" NPTF (dryseal) male, plastic polysulfone fitting	Water (1.0 S.G.)	4-28 GPM	Polysulfone	$88.00	2 in stock

Interested in Other Part Numbers?

Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Call for availability". Click here to select options